Null Modem

Tips and tricks to solve your problems FTA
ALE FORUM reached with messages written by members of different problems requiring service on several occasions met with the FTA. This article is a compilation of the most common and will act as a guide for all users of the FTA, the two novices and experience and will surely contribute greatly to a hassle free experience TLC. Of course, for a complete solution to any specific problems you may encounter, interaction with experts title = "TLC FILES"> the FILES FTA is highly recommended.
So to begin, the first thing that you can cope with a problem is to disable test using Switch back and leave for a few minutes before relighting. The only work to solve most of their problems, which explains why sometimes called a magic switch. So there is nothing to worry if this does not resolve your problem are listed below for a number of common problems and ways to circumvent.
Problem 1 - No picture:
The things that can contribute to this are the keys that have ceased to be renewed or if the keys are not in progress. Also, while most new units are equipped with automatic processing screens roll, others not.
Another way is to implement the function of ensuring the free / Is the power and to download a good card capture key, allowing you the keys. In addition, the role of auto roll seems to work faster in some channels such as the 150/200 ... 217/214.
If the keys are correct and make sure if your signal and quality levels are within the acceptable range, or if your antenna parameters have changed. Your type of LNB should be correct, since even a simple change here can cause loss of some chains. ports on the switch, if any, must also be correct. So it's time to review the team - as the cable should be free for the Knicks or cuts, etc, switch must be working, LNB has to be allowed and that the clay is not compatible.
Things you can do are: get the cable directly to the desktop without pass through the switch to make sure that the problem is not the LNB or switch. And if you think the problem is with the switch or port, the ports are moved to find if you of them has gone wrong. Visually check all the lines and switches, LNB, antenna angles, and check if the dish is offered. A good idea is to mark a straight line at all points of adjustment, azimuth and elevation, having verified alignment. This acts as a reference to a work "line-calling. So, if outside of alignment, all you do is simply return to the place where the line brands and you have a dish is aligned. It also allows visually checked the plate has moved.
Problem 2 - Channels Missing (little or scanner):
A common problem for which you must make sure satellite that is destined to right the parameters of the antenna is correct according to your LNB type and there is nothing wrong with your heart or transponder or, indeed, with the switch and port configuration. Other things you should be sure the file is updated by satellite or by using a list of new channels.
For out, perform a factory reset in the menus, or you can delete all channels and do a fresh search again.
When preparing your dish, you can use the frequency of the satellite transponder 12 224 thinner, other than 119 (12 239) and 121 (11 724). Moreover, of 119 examinations in 12 239, but will return to 12 224 from the default (24) is up beams.
Another factor may lead to this problem is to download a list of "wrong channel, the list channels tend to vary with location. So there must be screened from all available satellites. Another thing you should be sure if the style LNB matching the antenna setup, or, you miss many channels.
In addition, LNB are not immune to failure, the main symptom of a failure is if tps LNB receives only vertically or horizontally. And in case of accident, loses the signal and total quality. Therefore, the exchange of LNB to see if these are at fault.
Another thing you need to be sure if you have connected the RG6 cable in the right place at the back of your decoder. This may seem such stupid mistakes but check occur, so more OUT.
Problem 3 - Wait until the image or expected:
The reason could be that your tank is outdated and that the time to load the latest and greatest tray. Auto roll feature must be turned on. Works better on some channels, so that it works. Can take some time.
In addition, the car seems faster working roller chains 150 / 200 212 / 417 in the pot and the boys to the north. Can check the problem 1 above, which deals with auto roll / key issue.
Problem 4 - No Display EPG
If this is the case, then you must make sure that the date and GMT time and correct. Remember that GMT should be determined according to daylight savings time. See what the EPG is selected for the number of hours and SAT file is updated and correct. You can try to guide host on some models. If the device allows you to choose the number of hours your Guidance must be halved so that no more memory available for other channels.
If you use a Pansat (may work others) and his guide is not working properly provider for the North, you must rename the satellite to an appropriate name.
EPG tends to fill in some channels. So out section FAQ providers throw some good tips.
If you are facing some kind of 119-washer and the washer is filling information but 110 does not, so this is what you should do it.
To have a guide to seven days a Dish 110 and 119, press the SAT button on your remote.
Select washer package and then press "OK."
Where you have not selected the 110 and 119 Sat-dish you have.
Launch menu and press the Guide button.
Click "Search" button while the guide and let it sit on that channel for a few minutes.
The longer it is there, complete EPG, up to 7-Days.
For a guide to three days, press the SAT button on your remote.
Highlight the package in question.
If you do not have two, then select what you have.
Exit menu and press the Guide button.
Press the "View" button while in the guide and let it sit on that channel a few minutes away.
The longer it sits, the EPG has filled up a maximum of 2-3 days.
Note that the EPG can not be filled if you selected "All SAT" button on the satellite. In addition, can not fill the EPG as the dishes look and back. This is simply not possible because the EPG guide full of data only
provider you are seeing.
Issue 5 - Glitches:
The manufacturing times of files, it restores the unit in pristine condition. Download the factory, Bin to clean all these defects. Next, download the current container. However, this too will change all the settings of your statement to the original you have to work on this.
Beware of signs and the level of quality no less than 50% quality is subject to a time affected by hazards related.
Issue 6 - "Night Rider" (flashing lights):
This is usually a sign of bad flash or corruption , or even stop the process in some cases. Return to the blinking light of the new factory with his unit procedures can solve the problem. STB data processing to be transferred is interrupted if you do not expect the screen all come zero. This, in turn, may leave the STB with a corrupted file, which is also a sign of bad file for the wrong drive. Insurance So use the file from your device.
Therefore, make sure you use the latest version of Flash for channels encrypted. It may take several attempts to reload factory flash and reload after the last bin, reset the configuration of the antenna, as return to factory default settings with the flash. On the other hand, it is important that when flashing, you should wait until he said only that his opponent, but also until it is restarted and is in fact a channel number.
The difference between the cables:
Null modem cable also called "crossover" or "twisted pair" cable:
Viewsat is used for this cable has 9-pin if only the following are required:
The pin 2 to pin 3
Pin 3 to pin 2
Pin 5 to pin 5
Straight serial cable:
It also has nine pins, but are only necessary:
February 2 Pin
Pin 3 to pin 3
Problem 7 - When he saw that someone was sitting, but not another:
This problem is usually related to the change and you should conduct an audit of the following:
1. If the ports are blocked or partially cut to try to change ports
2. Pass the cable directly the LNB and the receiver went wrong, switch, or NPL
3. Replace switch
4. Restart the unit from the switch can get stuck, preventing it from moving
Problem 8 - Loading / Flash the hand (the ----- and 8888 onwards):
This is an area where most of the problems have not been a moment or another. So, things you should look are:
1. The cable from the camera flash should be correct. The cables are of two basic types - straight and void. The two are similar, but vary greatly.
2. Make sure you download the correct file or extract unzip a file.
3. Is this correct file loading the unity of law?
4. Is there any interruption during the download?
5. See what you using the right charger for unit right, since there are many units available and most are compatible with its own charger. COM port must be attached to one of four options tools.
To find the COM port - Go to My Computer - View System Information - click on the hardware - Open Device Manager. Just look for the COM port. In each section, usually has a sticker with the procedures of loading and its model.
Problem 9 - Black and White issues:
Screen went black and white after trying to adjust settings. A remedy this unit is to start again using the switch back. Once or twice is enough.
Using the color button button in the distance shout at each level by default. Then select the user and change all values to default levels. Select Exit. When using the rear switch, turn off the receiver. Put the receiver. This should bring color to the default time and the user's selection. After that, you can adjust the levels of users for the configuration best suited to its FTA Box.
Issue 10 - its not working:
If active channels, but no sound could be due to the following:
Check if the mute button I pressed.
If not, then most Dolby likely to be a problem.
If you do not use Dolby Surround, then go to menu - system configuration - user options. Select Dolby Here Autolock.
Check all cables and the Audio Settings button.
Restart the system using the magic switch.
Problem 11 - Plato moved because weather conditions:
When you have found a very high quality, use a permanent marker to mark distort his plate and elevations. In this way, you will not have this problem ever. If the dish has not moved to another location, use this satellite location in the hand: / Http: / / satcalculator.freehostia.com /
What are the problems commonly encountered by users of the FTA. If you need help otherwise, or if face a problem not mentioned here, please contact target = "_blank" title = "TLC KEYS"> FTA KEYS are able to resolve these issues.
About the Author
We run the largest FTA FORUM on the internet, if you need the latest FTA FILES and the newest a href=" http://www.goodfta.com/fta-keys.html">FTA FORUM visit us today!
Pansat 3500S/SD [Flashing With Null Modem Cable]
|
|
EMC² External Cable DB9/F to DB9/F Null Modem 118027206 For CX400 $395.00 |
|
|
EMC² External Cable DB9/F to DB9/F Null Modem 118027206 For DL700 $395.00 |
|
|
EMC² External Cable DB9/F to DB9/F Null Modem 118027206 For CX2000 $395.00 |
|
|
EMC² External Cable DB9/F to DB9/F Null Modem 118027206 For DL710 $395.00 |
|
|
EMC² External Cable DB9/F to DB9/F Null Modem 118027206 For CX500 $395.00 |
|
|
EMC² External Cable DB9/F to DB9/F Null Modem 118027206 For CX600 $395.00 |
|
|
EMC² External Cable DB9/F to DB9/F Null Modem 118027206 For DL300 $395.00 |
|
|
EMC² External Cable DB9/F to DB9/F Null Modem 118027206 For DL740 $395.00 |
|
|
EMC² External Cable DB9/F to DB9/F Null Modem 118027206 For DL720 $395.00 |
|
|
EMC² External Cable DB9/F to DB9/F Null Modem 118027206 For FC4500 $395.00 |
|
|
EMC² External Cable DB9/F to DB9/F Null Modem 118027206 For FC4700 $395.00 |
|
|
EMC² External Cable DB9/F to DB9/F Null Modem 118027206 For FC5000 $395.00 |
|
|
EMC² External Cable DB9/F to DB9/F Null Modem 118027206 For DL310 $395.00 |
|
|
EMC² External Cable DB9/F to DB9/F Null Modem 118027206 For CX700 $395.00 |
|
|
EMC² External Cable DB9/F to DB9/F Null Modem 118027206 For FC5300 $395.00 |
|
|
EMC² External Cable DB9/F to DB9/F Null Modem 118027206 For FC5500 $395.00 |
|
|
EMC² External cable DB9/F to DB25/F Null Modem 118027207 For FC4500 $395.00 |
|
|
EMC² External Cable DB9/F to DB9/F Null Modem 118027206 For FC5700 $395.00 |
|
|
EMC² External Cable DB9/F to DB9/F Null Modem 118027206 For CX300 $395.00 |
|
|
EMC² External Cable DB9/F to DB9/F Null Modem 118027206 For IP4700 $395.00 |
|
|
EMC² External cable DB9/F to DB25/F Null Modem 118027207 For FC5000 $395.00 |
|
|
EMC² External cable DB9/F to DB25/F Null Modem 118027207 For FC5500 $395.00 |
|
|
EMC² External cable DB9/F to DB25/F Null Modem 118027207 For FC5700 $395.00 |
|
|
EMC² External Cable DB9/F to DB9/F Null Modem 118027206 For AX100 $395.00 |
|
|
EMC² External cable DB9/F to DB25/F Null Modem 118027207 For FC5300 $395.00 |
|
|
Lot of 75 Verfone 13581-01 Male Null Modem Adapters (DB25/RJ45) $299.99 |
|
|
EMC² 10' Belkin Console Null Modem Cable 038-003-253 For RAINFINITY $295.00 |
|
|
EMC² Serial Null Modem Cable, DB9/F to DB9/F, 10 Ft 118031968 For DS-16M2 $295.00 |
|
|
EMC² Serial Null Modem Cable, DB9/F to DB9/F, 10 Ft 118031968 For DS-32M2 $295.00 |
|
|
EMC² Serial Null Modem Cable, DB9/F to DB9/F, 10 Ft 118031968 For DS-4400M $295.00 |
|
|
EMC² Serial Null Modem Cable, DB9/F to DB9/F, 10 Ft 118031968 For ED-12000B $295.00 |
|
|
EMC² 25 to 9 PIN M-M Null Modem Cable 038-000-966 For EDM $295.00 |
|
|
EMC² 25 to 9 PIN M-M Null Modem/25 Ft. Cable 038-000-949 For EDM $295.00 |
|
|
EMC² 25 to 9 PIN M-M Null Modem/2 Meter Cable 038-000-968 For EDM $295.00 |
|
|
EMC² External cable DB9/F to DB25/F Null Modem 118027207 $295.00 |
|
|
EMC² External Cable DB9/F to DB9/F Null Modem 118027206 $295.00 |
|
|
300-075 Eicon (Dialogic) Null Modem Cable (300075) $215.00 |
|
|
Dell EMS Null Modem DB9 Cable 25Ft 038-003-084 For CX3 AX4 NX4 CX4 $150.99 |
|
|
2M DB-9 RS232 Null-Modem Data Transfer Interface Extension Laptop Cable Adapter $139.06 |
|
|
0.5M DB-9 RS232 Null-Modem Data Transfer Interface Extension Adapter Cable 50CM $138.78 |
|
|
USB to Serial Null Modem Cable EuroVox Upgrade Lead $129.99 |
|
|
USB to Serial Null Modem Cable Upgrade Lead VISTA XP Win7 $130.16 |
|
|
LOT 50 6' DB9 Female to DB25 Male 9 Pin to 25 Pin NEW DB9F-DB25M NULL MODEM USA $110.95 |
|
|
NEW INTERMEC 226-106-002 Intermec Null Modem Cable - DB $125.56 |
|
|
Lot50 10ft DB9pin Male-Female Null Modem Cross/Nul wired,Serial RS232 Cable/Cord $115.99 |
|
|
Lot10 25ft DB9 Serial Null/Nul Modem Female-F,25'Cable $114.95 |
|
|
Lot of 50 6' DB9 9 Pin Null Modem Cross Null Wired Serial RS232 Cable Cord Wire $114.95 |
|
|
IBM 10N7712 NULL MODEM CABLE yz $100.00 |
|
|
EMC 25-Ft Fiber Optic Null Modem Micro-DB9 to DB9/F Serial Cable 038-003-084 $99.99 |
|
|
DRB 3 ITIL ISIS FLASH diagnostic UPDATE DRB3 DVD with Serial Null Modem Cable $95.99 |
|
|
... |
|
|
... |
|
|
... |
|
|
StarTech DB9 RS232 Serial Null Modem Adapter - F/F (NM9FF) $0.99 This Null Modem Adapter features two DB9 female connectors - a cost-saving way to convert a straight through cable into a null modem cable. The DB9F Null modem cable adapter is backed by lifetime warranty and free lifetime technical support.... |
|
|
Tripp Lite 6ft Null Modem Gold Cable DB9F/F (P450-006) $0.64 Null modem cables and adapters connect two serial devices that require a null modem (cross-wired) configuration. This 6ft cable has a DB9 female connector on each end. Superior molded cables with foil-shielding offer maximum EMI/RFI protection. Gold-plated connectors and contacts provide superior conductivity. Tripp Lite warrants this product to be free from defects in materials and workmanship fo... |
|
|
StarTech.com 10-Feet DB9 RS232 Serial Null Modem Cable F/F (SCNM9FF) $2.75 The SCNM9FF 10ft Cross Wired Serial/Null Modem Cable features two DB9 female connectors, allowing you to connect a serial printer to a 9-pin serial port, or transfer files from PC to PC via serial connection. Designed to provide a reliable, long-lasting connection, this serial/null modem cable is backed by StarTech.com's lifetime warranty.... |
|
|
CompTIA Network+ Certification All-in-One Exam Guide, 5th Edition (Exam N10-005) $30.19 Prepare for CompTIA Network+ Exam N10-005 with McGraw-Hill—a Gold-Level CompTIA Authorized Partner offering Authorized CompTIA Approved Quality Content to give you the competitive edge on exam day. Get complete coverage of all the material included on CompTIA Network+ exam N10-005 inside this comprehensive, up-to-date resource. Written by CompTIA certification and training expert Mike Meyers, ... |
|
|
UNIX and Linux System Administration Handbook (4th Edition) $44.40 “As an author, editor, and publisher, I never paid much attention to the competition–except in a few cases. This is one of those cases. The UNIX System Administration Handbook is one of the few books we ever measured ourselves against.” –From the Foreword by Tim O’Reilly, founder of O’Reilly Media “This book is fun and functional as a desktop reference. If you use U... |
|
|
CompTIA A+ Complete Study Guide Authorized Courseware: Exams 220-801 and 220-802 $24.99 CompTIA Authorized, fully updated Study Guide for the leading IT certification: CompTIA A+CompTIA A+ is the de facto certification for IT technicians. Some vendors even require employees to achieve certification as part of their job training. This book prepares you for both required exams: 220-801 and 220-802. Totally updated to cover the 2012 exams, this popular prep guide covers all the exam obj... |
|
|
CABLES TO GO 25ft db25m to db9f null modem cable $8.27 Description:	Cables To Go's line of Null Modem serial cables allows two DTE or DCE devices to communicate with no conflict in data transmission. The transmit and receive signals are crossed to ensure proper data transmission. Cables To Go's inexpensive, high-quality cables deliver the data for you quickly and reliably over short distances (less than 100 feet). Each of our Null Modem cables are d... |
|
|
Raritan Null Modem Adapter $16.99 Raritan Null Modem Adapter |
|
|
Raritan Null Modem Adapter $19.49 Raritan Null Modem Adapter |
|
|
APC Null Modem Cable $19.99 APC Null Modem Cable |
|
|
QVS Null modem cable $11.99 QVS Null modem cable |
|
|
Tripp Lite Null Modem Cable $10.49 Tripp Lite Null Modem Cable |
|
|
Tripp Lite Null Modem Cable $11.99 Tripp Lite Null Modem Cable |
|
|
C2G Null Modem Cable $12.49 C2G Null Modem Cable |
|
|
Tripp Lite Null Modem Cable $11.99 Null modem cables and adapters connect two serial devices that require a null modem (cross-wired) configuration. This 6ft cable has a DB9 female connector on each end. Superior molded cables with foil-shielding offer maximum EMI/RFI protection. ... |
|
|
C2G Null Modem Cable $10.99 C2G Null Modem Cable |
|
|
C2G Null Modem Adapter $10.99 C2G Null Modem Adapter |
|
|
null modem adapter $23.99 Black Box - Null modem adapter - DB-25 (M) - DB-25 (M) |
|
|
Null Modem Gold Cable $5.99 Tripp Lite Null Modem Gold Cable - Null modem cable - DB-9 (F) - DB-9 (F) - 6 ft - molded |








